SummaSign Pro T-series Cutters
User’ s Manual
Operation
2-26
NOTE
It is strongly recommended to produce a MENU PLOT hard copy
each time you alter the cutter configuration. The resulting plot should
be kept with the cutter documentation in order to provide other users
with details of the actual configurations of the unit.
2.5.4. CONFIDENCE CUT
The CONFIDENCE cut performs an electrical and mechanical test of the cutter
to make sure that the cutter is fully operational. A media sheet of at least
A3/A- size should be used for this plot.
2.5.5. DIN CUT
The DIN CUT also performs an electrical and mechanical test of the cutter, in
order to check the cut quality, but also provides the user with feedback on
knife setting, knife pressure, knife offset and cutting depth.
This cut is always run as a DIN A4 portrait/A-size image, regardless of the actual
size of the media loaded. If the media loaded is smaller than DIN A4/A-size,
part of the outer box will be clipped (not cut). This cut is always executed in the
sequence prescribed by the ISO DIN standard.
2.5.6. SYSTEM TESTS
The SYSTEM TESTS submenu covers the menu items you only occasionally need
to adjust the cutting process.
Press the
ENTER
key to access the different submenu items which are explained
