General Information
1-1
SECTION 1
GENERAL INFORMATION
1.1. INTRODUCTION
The SummaSign range of cutters has been designed to produce computer-
generated graphic designs on cut sheet or roll vinyl media. By replacing the
knife with a ballpoint pen, these cutters can also be used to produce
inexpensive previews of new graphic designs on paper.
This manual is a reference guide for installing and operating the SummaSign
Pro T-series cutter models. These cutter models feature a tangential head
indicated by the ‘T’ prefix to the product designation.
This manual covers the following SummaSign Pro T-series cutter models :
•
The SummaSign T750 Pro, which can handle media widths from 60 mm up to
762 mm (2.4” to 30”).
•
The SummaSign T1010 Pro, which can handle media widths from 110 mm up
to 1020 mm (4” to 40”).
•
The SummaSign T1400 Pro, which can handle media widths from 110 mm up
to 1370 mm (4” to 54”).
The term ‘Pro T-series cutters’ is used when information is provided which is
common to all members of this series. The specific model terms T750 Pro, T1010
Pro and T1400 Pro are used if information pertains only to that particular model.
1.1.1. PRODUCT FEATURES
The following are the main features of the SummaSign Pro T-series cutters.
•
Variable media widths.
•
User-selectable DM/PLTM, HP/GLTM and HP/GL/2 TM software languages.
•
Interchangeable drag knife
