background image

1

Matters described in                               may lead to serious danger depending on the situation. Be sure to observe
important matters described herein.

DANGER

   Transport, installation, plumbing, operation, maintenance, and inspections should be handled by properly

trained technicians ; otherwise, injury or damage to the machine may result.

   Do not disassemble PARAMAX SINGLE STAGE DRIVES SPA Series during operation. Even if it is at rest, 

do not disassemble any parts other than the oil inlet/outlet when the input/output shafts of the PARAMAX 
SINGLE STAGE DRIVES SPA Series  is connected to a motor or other mating machines; otherwise falling or 
operation out of control due to disengagement of gears, as well as death, injury, or damage to the machine may result.

   Carefully read this maintenance manual and all accompanying documents before use (installation, operation,

maintenance, inspection, etc.). Thoroughly understand the machine, information about safety, and all precautions for
correct operation. 
Maintain this manual for future reference.

   Pay particular attention to the "DANGER" and "CAUTION" warnings regarding safety and proper use.

DANGER

CAUTION

   The unit should be operated only within its design and performance specifications ; otherwise, injury or

damage to a system may occur.

   Keep hands and all foreign objects from the internal moving parts of the unit ;  otherwise, injury or damage to

a system may occur.

   Damaged units should be taken off - line and not put back in operation until properly repaired.
   Any modifications or alterations of any kind, to the unit, will void the warranty and all subsequent claims.
   Do not remove the rating plate.

CAUTION

CAUTION

CONTENTS

Safety and other precautions.......................1

1. Inspection upon delivery ............................ 2

2. Storage....................................................... 3

3. Transport .....................................................3

4. Installation .................................................. 3

5. Coupling with other machines .................... 4

6. Lubrication.................................................. 5

7. Cooling Coil ............................................... 7

8. Operation ................................................... 8

9. Daily inspection and maintenance ............. 9

10. Troubleshooting ....................................... 10

11. Disassembly/reassembly and disposal .... 10

12. Construction drawing ............................... 11

13. Locations of oil filler and drain plug ...........11

14. Warranty................................................... 12

   Oil has been removed from PARAMAX SINGLE STAGE DRIVES SPA Series  before shipment from our factory, 

so supply recommended oil before use.

: Improper handling may result in physical damage, serious personal injury and/or

death.

: Improper handling may result in physical damage and/or personal injury.

(Safety and other precautions)

Содержание PARAMAX SPA Series















Отзывы: