Sullair LS-25S-257KW, Руководство оператора и список запасных частей

Страница: 22 / 83

Section 3
SPECIFICATIONS
17
3.2 LUBRICATION GUIDE---STANDARD COMPRES-
SORS
Sullair standard compressors are filled with Sul-
lube fluid as factory fill.
WARNING
!
To be sure that you receive the correct fluid for
your compressor, when ordering fluid, always
confirm your compressor’s fluid fill with the parts
technician by using your compressor’s serial
number.
Sullube fluid should be changed every 8000 hours
or once a year, whichever comes first. The fluid
should be changed more frequently under severe
operating conditions, such as high ambient tem-
peratures coupled with high humidity, or when high
particulate level, corrosive gases or strong oxidiz-
ing gases are present in the air.
WARNING
!
Mixing of other lubricants within the compressor
unit will void all warranties!
WARNING
!
“The Plastic Pipe Institute recommends against the
use of thermoplastic pipe to transport compressed
air or other compressed gases in exposed above
ground locations, e.g. in exposed plant piping.” (
I
)
Sullube should not be used with PVC piping sys-
tems. It may affect the bond at cemented joints. Cer-
tain other plastic materials may also be affected.
(
I
) Plastic Pipe Institute, Recommendation B,
Adopted January 19, 1972.
3.3 APPLICATION GUIDE
Sullair encourages the user to participate in a fluid
analysis program with the fluid suppliers. This
could result in a fluid change interval differing from
that stated in the manual. Contact your Sullair
dealer for details.