SUHNER ABRASIVE UWG 11-R, Техническая документация

Страница: 23 / 132

CN
CZ
PL
FI
SE
NL
PT
ES
IT
EN
Power Output 640W
No-load speed 10500min -1
Max. tool Ø 125mm
Grinding spindle thread M14
Sound pressure level EN 60745 93dB(A), K=3dB
Noise emission level 104dB(A), K=3dB
Vibration EN 60745 6m/s 2 , K=1.5m/s 2
Weight w/o cable 2.1kg
Protection class II
2.3.2 uwK 11-r
Power voltage 230/240V, 50/60Hz
Power Input 1700W
Power Output 1040W
No-load speed 11000min -1
Max. tool Ø 125mm
Grinding spindle thread M14
Sound pressure level EN 60745 93dB(A), K=3dB
Noise emission level 104dB(A), K=3dB
Vibration EN 60745 6m/s
2
, K=1.5m/s
2
Weight w/o cable 2.5kg
Protection class II
The specified vibration value was measured with a
standardised test procedure. It can be used to
compare products or to make an initial assess-
ment of the exposure. The vibration emissions may differ
from the specified value,
depending on how the power
tool is used. Operating personnel must be protected with
defined safety measures based on the estimated expo-
sure under the actual conditions of use
(these must take
into account all phases of the operating cycle, e.g. the
times when the power tool is switched OFF and the times
it is switched ON, but is not under load).
2.4 o
perAting conditions
Temperature range during operation: 0 to +50°C
Relative air humidity: 95% at +10°C not condensed
3.
haNDLINg
/ o
PERaTIoN
3.1 p
rotectiVe deVices
For safety reasons, always use the safety
guard provided for the respective wheel!
3.1.1 A
ttAch the sAfety guArd
Push and hold the lever. (1). Place the safety guard in the
position indicated (2). Release the lever and turn the safe-
ty guard until the lever engages.
Push the lever and turn the safety guard until the closed
section is facing the operator. Make sure that the guard is
placed securely: The lever must engage and you should
not be able to turn the safety guard.
Use only accessories that are covered by at least 3.4 mm
by the safety guard.
Disassemble in reverse order.
For reasons of safety, attach the cutting guard before per-
forming cutting-off operations.
3.1.2 A
ttAching the AdditionAl hAndle
Always work with the additional handle attached! Attach
the additional handle on the left or right of the machine
and secure.
FR
DE
EN
23