70970-UK-01
Document
INSTRUCTION MANUAL
Date
May 01 2016
Title of document
INSTRUCTION MANUAL and WARNINGS FOR USE XK 1
Revision
001
TO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM WWW.SUEX
Page 38 of 47
42.4 P
ROP LOCK PROPELLER MAINTENANCE
.
The prop lock propeller does not require maintenance. However, make sure that
everything is clean and free of foreign objects before inserting it on the ADV shaft.
IMPORTANT NOTE:
THE PROP LOCK PROPELLER SINKS WHEN SUBMERGED IN WATER!
WHEN REMOVING AND REPLACING THE PROPELLER UNDERWATER, BE
CAREFUL SINCE YOU COULD RISK LOSING IT AND, CONSEQUENTLY, LOSE USE
OF YOUR UNDERWATER SCOOTER.
WHEN THE SAFETY CLUTCH TRIGGERS, MAKE SURE THE PROP LOCK
PROPELLER DOES NOT UNSCREW BY ROTATING THE KNOB (31) CLOCKWISE.
WHENEVER OBJECTS HIT THE PROPELLER BLADES, MAKE SURE THE PROP
LOCK PROPELLER IS PERFECTLY SCREWED IN.
42.5 P
ROP LOCK PROPELLER TROUBLESHOOTING
.
PROBLEM
CAUSE - SOLUTION
Rotating the white knob requires excessive strain
The knob was damaged and should be replaced*
Even if the shaft pin is in the correct position in the
propeller housing, the friction jerks and the scooter
does not move forward.
The traction pin was damaged (bent) and should be
replaced.
The propeller hub was damaged and should be
replaced*
The white knob turns freely and does not stop the
propeller.
Too much force was used to tighten the knob and it
was damaged. It should be replaced.*
The screw on the knob turns freely
The knob was damaged and should be replaced*
*operations to be conducted at a authorized SUEX service centre.
Note:
The prop lock propeller is larger than a standard propeller (the white
knob protrudes further).
This means that the use must pay closer attention when standing
the ADV on the flow conveyor in the vertical position. Any collisions
with the propeller (larger) could damage both the prop lock
propeller and ADV.