70970-UK-01
Document
INSTRUCTION MANUAL
Date
May 01 2016
Title of document
INSTRUCTION MANUAL and WARNINGS FOR USE XK 1
Revision
001
TO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM WWW.SUEX
Page 14 of 47
7.2 S
ETTINGS AND TRIM ADJUSTMENTS
According to salinity or water temperature, you may need to adjust the buoyancy or trim
settings (trim is the ADV longitudinal axis inclination).
As for buoyancy, the ADV is produced to slightly float in both fresh water (without using the
ballast 23) and sea water (using the ballast 23).
As for trim, you can change factory settings by moving the battery along the rods (13) (see
fig.7). Remove the battery, loosen the nut (21) with a 4 mm Allen key, unscrew or screw in
the ring nut (22); screwing it in, the ADV tends to position itself with the rear sinking,
unscrewing it causes the opposite. Screw in the nut (21) without overtightening, replace
the battery and try the ADV in the water until the desired settings are reached.
8 S
AFETY INSTRUCTIONS
8.1 I
NDICATOR LABEL
The following indicator label is found on the scooter. It should not be removed, tampered
with or destroyed. The user of the scooter shall be responsible for replacing any worn out
or illegible label with a new one, it must be requested to our after-sales service.
SUEX S.r.l. will not be liable for damages and accidents happened in consequence of
behaviors in contradiction to the indications in it reported.