EN
4/4
SUEVIA HAIGES GmbH Max-Eyth-Str. 1 74366 Kirchheim am Neckar Deutschland Tel. +49 7143 971-0 Fax +49 7143 971-80
www.suevia.com [email protected] Stand: 05.11.2010
3. Change of the brushes
Notice:
The change of the brushes depends on own estimation.
A change is recommend when bristles are shorter than 5 cm.
Figure 6: Overview of the brushes
3.1. Change of the upper brush
Procedure (see also Figure 7):
Remove the screw (Pos. 1).
Remove the disc (Pos. 2).
Drag down the brush of the square bar steel (Pos. 3).
Figure 7: Fixation of the upper brush
3.2. Change of the lower brush
Procedure (see also Figure 8):
Remove the screws (Pos. 1) on the left and on the
right.
Remove Pos. 2 together with the bearing.
Remove the locking ring (Pos. 3).
Drag down the brush of the square bar steel (Pos. 4).
Figure 8: Fixation of the lower brush
4. Spare parts list
Order-No.
Description
132.4100
Disk with hole
132.4101
Electric cable 5x1 mm² RD white
132.4102
Electric cable with plug, 2 m
132.4103
Elektric motor 0,37 kW
132.4104
Bump rubber 75x30 Type D
132.4105
Magnet switch
132.4106
Upper brush, length 550 mm
132.4107
Lower brush, length 650 mm
132.4108
Tension Spring 4,5 x 40 x 368
132.4109
Controller 230 V
5. Maintenance
Please check monthly for tight screws and grease in the slide,
Lower brush: length 650 mm
Pos. 1
Pos. 2
Pos. 3
Pos. 4
Pos. 3
Pos. 2
Pos. 1
See Figure 7
See Figure 8
Upper brush: length 550 mm
