Subaru Legacy 2020, Руководство пользователя

Страница: 80 / 244

3.
Select the Bluetooth phone/device to be connected or
disconnected.
X
11.6-inch display system/11.6-inch display with Navi
system
X
Dual 7.0-inch display system
●
To disconnect the Bluetooth phone/device, select
Yes
(Yes).
●
“Connected” is displayed next to the currently connected
Bluetooth phone/device.
●
If the desired Bluetooth phone/device is not on the list,
select
(Add) to register the Bluetooth phone/
device. (
→
P.78)
4.
Check that “Connected” is displayed next to the Bluetooth
phone/device when the connection is complete.
●
If an error message appears, follow the guidance on the
screen to try again.
NOTE
l
It may take time if the Bluetooth phone/device connection is carried
out during Bluetooth audio playback.
l
Depending on the type of Bluetooth phone/device being connected,
it may be necessary to perform additional steps on the Bluetooth
phone/device.
AUTO CONNECTION MODE
Leave the Bluetooth phone/device in a location where the
connection can be established.
●
When the ignition switch is turned to the “ACC” or “ON”
position, the system searches for a nearby registered
Bluetooth phone/device.
●
The system will connect with the registered Bluetooth
phone/device that was last connected, if it is nearby.
Bluetooth® SETTINGS
80
GB8_US.indb 80 2020/10/09 7:22:31