MAP UPDATE (IF EQUIPPED)
If a problem occurs when attempting to perform a map update, refer to the following table.
X
Errors when updating via USB
Error code
Cause
Solution
“Installation
Failed (1)”
Reading of the data on the USB memory device failed.
Disconnect and then reconnect the USB memory device, check that it is
connected correctly, and attempt to perform the update again.
“Installation
Failed (2)”
Corruption of the data on the USB memory device was
detected.
Attempt to perform the update again. If the same error is detected,
download the map update data again, copy it to a different USB memory
device and attempt to perform the update again.
“Installation
Failed (5)”
An error in the system data was detected while
performing the update.
Attempt to perform the update again. If the same error is detected,
download the map update data again, copy it to a different USB memory
device and attempt to perform the update again.
“Installation
Failed (X)”
An unspecified error has occurred.
Attempt to perform the update again. If the same error is detected,
contact your SUBARU dealer.
WHAT TO DO IF
240
GB8_US.indb 240
2020/10/09 7:23:22
Содержание Legacy 2020
Страница 62: ...MEMO 62 GB8_US indb 62 2020 10 09 7 22 25...
Страница 184: ...MEMO 184 GB8_US indb 184 2020 10 09 7 23 08...
Страница 216: ...MEMO 216 GB8_US indb 216 2020 10 09 7 23 20...