Subaru Forester Скачать руководство пользователя страница 66

Страница: 66 / 397

Black plate (68,1)

一

般

Model "A8140GE-A" EDITED: 2007/ 12/ 13

1-42

Seat, seatbelt and SRS airbags

SRS frontal airbag

The driver

’

s SRS frontal airbag is stowed

in the center portion of the steering wheel.
The passenger

’

s SRS frontal airbag is

stowed near the top of the dashboard
under an

“

SRS AIRBAG

”

mark.

In a moderate to severe frontal collision,
the driver

’

s and front passenger

’

s SRS

frontal airbags deploy and supplement the
seatbelts by reducing the impact on the
driver

’

s and front passenger

’

s head and

chest.

WARNING

NEVER INSTALL A REARWARD FA-
CING CHILD SEAT IN THE FRONT
SEAT. DOING SO RISKS SERIOUS
INJURY OR DEATH TO THE CHILD

BY PLACING THE CHILD

’

S HEAD

TOO CLOSE TO THE SRS AIRBAG.

A warning label as shown above is
attached to the sun visor.

This warning label means

“

Extreme

Hazard! Do not use a rearward-facing
child restraint on a seat protected by an
airbag in front of it!

”

WARNING

Never allow a child to stand up, or to
kneel on the front passenger

’

s seat.

The SRS airbag deploys with con-
siderable force and can injure or
even kill the child.

Содержание Forester














































































































































































































































































































































































































Результаты поиска

Содержание Forester

Отзывы:

Похожие инструкции для Forester

Бренды по названию

Популярные бренды

Subaru Forester, Руководство пользователя

Результаты поиска

Содержание Forester

Отзывы:

Похожие инструкции для Forester

Бренды по названию

Популярные бренды