Subaru Forester, Руководство пользователя

Страница: 231 / 397

Black plate (238,1)
一 般
Model "A8140GE-A" EDITED: 2007/ 12/ 13
7-6
Starting and operating
6. Confirm that all warning and indicator
lights have gone off after the engine has
started. The fuel injection system auto-
matically lowers the idle speed as the
engine warms up.
NOTE
The engine may be difficult to start
when the battery has been discon-
nected and reconnected (for mainte-
nance or other purposes). This diffi-
culty is caused by the electronically
controlled throttle
’
s self-diagnosis
function. To overcome it, keep the
ignition switch in the
“
ON
”
position
for approximately 10 seconds before
starting the engine.
!
AT vehicles
1. Apply the parking brake.
2. Turn off unnecessary lights and ac-
cessories.
3. Shift the selector lever to the
“
P
”
or
“
N
”
position (preferably
“
P
”
position).
4. Turn the ignition switch to the
“
ON
”
position and check the operation of the
warning and indicator lights. Refer to the
“
Warning and indicator lights
”
section in
chapter 3.
5. Turn the ignition switch to the
“
START
”
position without depressing the accelera-
tor pedal. Release the key immediately
after the engine has started.
If the engine does not start, perform the
following procedures.
(1) Turn the ignition switch to the
“
LOCK
”
position and wait for at least
10 seconds. After checking that the
parking brake is firmly set, turn the
ignition switch to the
“
START
”
position
while depressing the accelerator pedal
slightly (approximately a quarter of the
full stroke). Release the accelerator
pedal as soon as the engine starts.
(2) If this fails to start the engine, turn
the ignition switch back to the
“
LOCK
”
position and wait for at least 10
seconds. Then fully depress the accel-
erator pedal and turn the ignition
switch to the
“
START
”
position. If the
engine starts, quickly release the
accelerator pedal.
(3) If this fails to start the engine, turn
the ignition switch again to the
“
LOCK
”
position. After waiting for 10 seconds
or longer, turn the ignition switch to the
“
START
”
position without depressing
the accelerator pedal.
(4) If the engine still does not start, we
recommend that you contact your
nearest SUBARU dealer for assis-
tance.
6. Confirm that all warning and indicator
lights have gone out after the engine has
started. The fuel injection system auto-
matically lowers the idle speed as the
engine warms up.
While the engine is warming up, make
sure that the selector lever is at the
“
P
”
or
“
N
”
position and that the parking brake is
applied.
CAUTION
If you restart the engine while the
vehicle is moving, shift the selector
lever into the
“
N
”
position. Do not
attempt to place the selector lever of
a moving vehicle into the
“
P
”
posi-
tion.
NOTE
The engine may be difficult to start
when the battery has been discon-
nected and reconnected (for mainte-
nance or other purposes). This diffi-
culty is caused by the electronically
controlled throttle
’
s self-diagnosis
function. To overcome it, keep the
ignition switch in the
“
ON
”
position
for approximately 10 seconds before
starting the engine.