Subaru Forester, Руководство пользователя

Страница: 125 / 397

Black plate (130,1)
一 般
Model "A8140GE-A" EDITED: 2007/ 12/ 13
3-8
Instruments and controls
–
On the floor
–
Inside the glove box
–
Inside the door trim pocket
–
On the rear seat
–
At the corner of the cargo area
.
If the battery of the access key is
discharged, perform the procedure
described in
“
When access key does
not operate properly
”
in this section to
switch the power. In such a case,
replace the battery immediately. Refer
to the
“
Replacing battery of access
key
”
section in chapter 2.
&
Switching power
1) Operation indicator
2) Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver
’
s seat.
2. Make sure that the shift lever is in
neutral (MT vehicles). Make sure that the
selector lever is in the
“
P
”
position (AT
vehicles).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
vehicles) or the brake pedal (AT vehicles).
Every time the button is pressed, the
power is switched in the sequence of
“
OFF
”
,
“
Acc
”
,
“
ON
”
and
“
OFF
”
. When the
engine is stopped and the push-button
ignition switch is in
“
Acc
”
or
“
ON
”
, the
operation indicator on the push-button
ignition switch illuminates in orange.
Power
status
Indicator color Operation
OFF Turned off
Power is turned
off.
Acc Orange
The following
parts can be
used:
wipers, washer,
audio and ac-
cessory power
outlet.
ON
Orange
(while engine is
stopped)
All electrical
parts can be
used.
Turned off
(while engine is
running)
!
Battery drainage prevention func-
tion
When the power is left in
“
Acc
”
for
approximately 1 hour, the power will be
automatically switched to
“
OFF
”
to prevent
the battery from going dead. (In AT
vehicles, this function is activated when
the selector lever is in the
“
P
”
position.)
CAUTION
.
When the power is left in
“
ON
”
or
“
Acc
”
for a long time, it may
result in vehicle battery dis-
charge.