Symptom
Cause
Solution
Installation does not complete (system
restarts continuously).
-
Wait until the home screen is displayed.
• Depending on the software version you
are updating from, updating may be
performed in multiple steps and the system
may restart multiple times. This is not a
malfunction.
“Software update install failed” is displayed.
The system software has been corrupted.
Have the software updated by your SUBARU
dealer immediately.
In this case, none of the system functions,
other than the rear camera, will operate.
When using the rear camera, only the
camera image will be displayed, guide lines,
etc. will not be displayed.
If this message is displayed, the system will
restart every 180 seconds. In this situation,
turn the ignition switch to the “LOCK”/“OFF”
position, open and close the driver’s side
door and check that the system is off. If
any door is open when the ignition switch
is turned to the “LOCK”/“OFF” position, the
system may not turn off.
WHAT TO DO IF
238
docstructure.indb 238
2019/05/31 14:17:06
Содержание Forester 2020
Страница 84: ...MEMO 84 docstructure indb 84 2019 05 31 14 15 52...
Страница 248: ...MEMO 248 docstructure indb 248 2019 05 31 14 17 07...