Subaru 2013 Forester, Руководство пользователя

Страница: 97 / 529

Black plate (99,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
switch and turned to the
“
ON
”
position
(models without
“
keyless access with
push-button start system
”
)
If the transmitted ID code matches the ID
code registered in the immobilizer system,
the system allows the engine to be
started. Since the ID code is transmitted
and acted upon almost instantly, the
immobilizer system does not impede
normal starting of the engine.
If the engine does not start, perform either
of the following procedures.
.
Perform the procedure described in
“
Starting engine
” F
9-17 (models with
“
keyless access with push-button start
system
”
).
.
Pull out the key once before trying
again (models without
“
keyless access
with push-button start system
”
). Refer to
“
Ignition switch (models without push-
button start system)
” F
3-4.
CAUTION
.
Do not place the key under direct
sunlight or anywhere it may
become hot.
.
Do not get the key wet. If the key
gets wet, wipe it dry with a cloth
immediately.
NOTE
To protect your vehicle from theft,
please pay close attention to the fol-
lowing security precautions.
.
Never leave your vehicle unattended
with its keys inside.
.
Before leaving your vehicle, close all
windows and the sunroof, and lock the
doors and rear gate.
.
Do not leave spare keys or any
record of your key number in the
vehicle.
&
Immobilizer indicator
light
Refer to
“
Immobilizer indicator light
” F
3-
30.
&
Key replacement
Your key number plate will be required if
you ever need a replacement key made.
Any new key must be registered for use
with your vehicle
’
s immobilizer system
before it can be used. The maximum
number of keys that can be registered
for use with one vehicle is as follows.
.
Four (models without
“
keyless access
with push-button start system
”
)
.
Seven (models with
“
keyless access
with push-button start system
”
)
One key that has already been registered
is required in order to register a new key.
If you lose a key, the lost key
’
s ID code still
remains in the memory of the vehicle
’
s
immobilizer system. For security reasons,
the lost key
’
s ID code should be erased
from the memory. To erase the lost key
’
s
ID code, all keys that will be used are
required.
For details about new key registration and
erasing the lost key
’
s ID code, we
recommend that you contact your
SUBARU dealer.
&
Technical information for
Europe models
This device complies with the essential
requirements and other relevant provi-
sions of the Radio and Telecommunica-
tions Terminal Equipment Directive
1999/5/EC. A copy of the original Declara-
tion of Conformity and the CE marking are
found in the chapter 13.
Keys and doors/Immobilizer
2-3
2