Subaru 2013 Forester, Руководство пользователя

Страница: 106 / 529

Black plate (108,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
2-12
Keys and doors/Keyless access with push
–
button start system
.
When the battery of the access key is
discharged, or when operating it in a
location with strong radio waves or noise
(e.g., near a radio tower, power plant,
broadcast station or an area where wire-
less equipment is used), or while talking
on a cell phone, the operating ranges may
be reduced, or the keyless access func-
tion may not operate.
In such a case, perform the procedure
described in
“
Locking and unlocking
” F
9-
16.
.
When an access key is in the operating
range, if the door handle becomes wet
due to exposure to a significant amount of
water when the vehicle is washed or
during heavy rain, the doors may be
locked or unlocked.
.
The keyless access function may not
operate properly depending on the status
of the access key and the radio wave
conditions around the vehicle. In such a
case, perform the procedure described in
“
Locking and unlocking
” F
9-16.
!
How to use keyless access func-
tions
!
Keyless access function tips
.
When you lock the doors and rear gate
using the keyless access function, turn the
push-button ignition switch off. It is not
possible to lock the doors and rear gate
using the keyless access function when
the push-button ignition switch is on the
“
ACC
”
or
“
ON
”
position. Refer to
“
Switch-
ing power
” F
3-7.
.
Locking and unlocking by using the
keyless access function cannot be oper-
ated for a short period of time (approxi-
mately less than 3 seconds) after locking
or unlocking to prevent malfunctions.
.
If the door handle is gripped with a
gloved hand, the door lock may not be
released.
.
When performing the locking proce-
dure too quickly, locking may not have
been completed. After locking the doors, it
is recommended to pull the REAR door
handles to confirm that the doors have
been locked.
.
It is not possible to lock the doors when
one of the doors is open. Close all of the
doors including the rear gate and lock the
doors.
.
Within 3 seconds after locking the
doors and the rear gate by using the
keyless access function, it is not possible
to unlock the doors and/or the rear gate by
using the keyless access function.
.
If any of the doors or the rear gate is
open, the doors and the rear gate cannot
be locked.
.
When locking, be sure to carry the
access key to prevent locking the access
key in the vehicle.
.
The setting of the hazard warning
flasher operation can be changed by your
SUBARU dealer. We recommend that you
contact your SUBARU dealer for details.
.
For models with multi function display,
the setting of the hazard warning flasher
operation can be changed by operating
the multi function display. For details, refer
to
“
Hazard warning flasher setting
” F
3-79.