Subaru 2013 Forester, Руководство пользователя

Страница: 248 / 529

Black plate (250,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
4-10
Climate control/Defrosting
Defrosting
NOTE
When the
“ ”
or
“ ”
mode is se-
lected, the air conditioner compressor
automatically operates to more quickly
defrost the windshield. At the same
time, the air inlet selection is automa-
tically set to the outside air mode.
&
Type A
Select the
“ ”
or
“ ”
mode by turning the
airflow mode selection dial to defrost or
dehumidify the windshield and front door
windows.
&
Type B
Select the
“ ”
mode by pressing the
defroster button, or select the
“ ”
mode
by turning the airflow mode selection dial
to defroster or to dehumidify the wind-
shield and front door windows.
If the defroster button is pressed while the
“ ”
mode is selected, it will return to the
previous mode before selecting the
“ ”
mode.
&
Type C
Select the
“ ”
mode by pressing the
defroster button, or select the
“ ”
mode
by pressing the airflow mode selection
button to defroster or to dehumidify the
windshield and front door windows.
If the defroster button is pressed while the
“ ”
mode is selected, it will return to the
previous mode before selecting the
“ ”
mode.
Operating tips for heater and
air conditioner
&
Cleaning ventilation grille
1) Front ventilation inlet grille
Always keep the front ventilation inlet grille
free of snow, leaves, or other obstructions
to ensure efficient heating and defrosting.
Since the condenser is located in front of
the radiator, this area should be kept clean
because cooling performance is impaired
by any accumulation of insects and leaves
on the condenser.
&
Efficient cooling after parking
in direct sunlight
After parking in direct sunlight, drive with
the windows open for a few minutes to