Subaru 2013 Forester, Руководство пользователя

Страница: 109 / 529

Black plate (111,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
&
Warning chimes and warning
light
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning light on
the combination meter in order to minimize
improper operations and help protect your
vehicle from theft.
For details, refer to
“
Warning chimes and
warning light of the keyless access with
push-button start system
” F
3-25.
&
Disabling keyless access
function
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the
keyless access function can be disabled.
NOTE
.
The locking and unlocking function
by the remote keyless entry system is
not disabled.
.
The setting can also be changed at
SUBARU dealers. For more details, we
recommend that you contact a
SUBARU dealer.
.
To start the engine while the func-
tions are disabled, perform the proce-
dure described in
“
Starting engine
”
F
9-17.
.
We recommend that you disable the
keyless access functions under the
following conditions.
–
When the vehicle is not going to
be used for an extended period of
time
–
When the keyless access func-
tions are not going to be used
–
When the access key needs to be
stored inside or near the vehicle
!
Disabling functions
1. Sit in the driver
’
s seat, and close the
door.
2. Push the rear side (unlock side) of the
power door locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver
’
s door.
4. Within 5 seconds after step 3 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
5. Within 30 seconds after step 4 is
performed, close and open the driver
’
s
door twice.
6. Within 30 seconds after step 5 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
7. Within 30 seconds after step 6 is
performed, close and open the driver
’
s
door once.
8. Within 5 seconds after step 7 is
performed, close the door. A chirp sound
will be heard for 2 seconds, and the
functions will be disabled.
NOTE
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
!
Enabling functions
When the procedure to disable the func-
tions is performed again, the functions will
be enabled.
A chirp sound will be heard once.
Keys and doors/Keyless access with push
–
button start system
2-15
–
CONTINUED
–
2