The CRC-1001/CRC-1001-C are single set point cold room
controllers. The Sub-Zero CRC-1001/CRC-1001-C are
aesthetically superior versions of their predecessors.
A number of parameters are displayed alphanumerically to set
up the instrument for each specific function.
The CRC-1001/CRC-1001-C controller can be used for
several applications with a measuring range from
O
O
-50.0 C to50.0 C.
The controller controls the defrost in the system based on time
based where the compressor is stopped. It is also possible to
select the interval between defrosts and a maximum time out
after which the defrost is interrupted.
There are safety features which include shutting down the
system incase of a fault from a pressure control or similar
device.
A series of “safety controls” (delay at start-up, minimum disable
time, minimum time between activation) protects the
compressors from close starts. In case of probe error or
temperature alarm, the instrument signals the event through
acoustic signal and by closing the relay contact. By pressing
the mute key, the buzzer is silenced.
Introduction
03
04
Get to Know Your Controller
Items included
NO.
1.
2.
3.
4.
QTY
ITEMS
CONTROLLER
CATALOGUE
NTC SENSOR 3 METER
1
1
1
3
6 X 25 SCREW
R
CRC-1001
FAULT LOG
VOLT
Amp.
HP/LP
UL/OL
UV/OV
E
RST
PRG
SET
AUX
Dot Matrix LED Display
LED
Indications
Lamp
Key
Reset
Key
Defrost
Key
Program Mode
Key
Up / Volt.
Key
Down / Amp.
Key
Set Key
Power ON/OFF
Key
Fault
Log Key
N
C
E
Y
G
S
R
T
E
O
M
P
E
