Sub-Zero 600-2 Series, Руководство по обслуживанию

Страница: 6 / 63

Page 6
7-6
Component Access / Removal
Built-In
Built-In
(600-
(600-
2
2
)
)
Series
Series
#3758407 - Revision B - August, 2006
Light and Fan Switch (601R-2, 601RG-2, 601F-2)
Light / fan switches are mounted in upper grille section.
To remove a switch, the lower and upper grille sections
must be removed first, then
(See Figure 7-9):
1. Disconnect wire leads from switch.
2. Depress tab on side of switch while pushing switch
out of the opening in upper grille section.
Light and Fan Switch (All models except 601’s)
Light and fan switches are mounted in top mainframe.
To remove a switch, first remove the grille, then (See
Figure 7-10):
1. Remove switch enclosure directly behind top main-
frame extrusion.
2. Disconnect wire leads from switch.
3. Open refrigerator or freezer door below switch.
4. Depress tab on side of switch while pushing switch
down, out of the opening in mainframe extrusion.
Figure 7-10. Switch
Figure 7-9. Switch (601’s)
Light Switch
Fan Switch
Mainframe
Light Switch Fan Switch
Upper Grill
Section