Delete channels : Select the channel that you want to
delete. Press first SELECT key and then EXIT key.
Please note. Channels deleted this way will be
permanently deleted. The only way to get
them back is to perform a new channel
search.
Move channel : You can arrange the order of channels
within the lists.
To rearrange channels, select the channel which you want to move using the SELECT key.
Move the channel to the desired Position using the CH
/CH
keys.
Rewording Channel Name: You can change the channel name. Press SELECT key and
edit the channel name with the VOL
/VOL
, CH
/CH
keys.
Lock Control
Receiver Lock : If you select Receiver Lock “On”,
you are requested to enter the password every time
you start the STB from standby. The password is set
to “0000” by the factory default.
Change Password : From here you can change the
password from the standard “0000”. Without the
password, you do not have any access of the
functions where the code required. If you forget your code, please contact your local dealer.
A/V Output Setting
TV Screen Format : If you have a TV with a 4:3 picture format, and the transmission is in
16:9, you can select “Standard” (4:3 Pan & Scan), or “Letter” (4:3 Letterbox) to change the
TV screen format. “Standard” will fill up the screen vertically, but cut off some information
from the left and right side of the picture. “Letter” will give a complete picture, but leave
black areas at the top and bottom.
TV Type : To select the Signal of your TV Type between PAL, NTSC or AUTO.
System setting
