Connect one scart cable between the main scart socket on the TV and the TV scart socket of the
STB. Connect another scart cable between the VCR and the VCR scart socket on the STB.
For receiving terrestrial channels connect the RF cable from the RF output socket on the VCR to
the RF IN socket on the TV and connect the TV antenna to the RF input socket on the VCR.
Connect the coaxial cable from the LNB to the LNB input socket on your
motorized DiSEqC system. Connect the coaxial cable from the LNB output socket
of your DiSEqC motor system to the LNB IN socket on the STB.
If you have another analogue or digital STB and you wish to use the same LNB, then you
can connect it via the loop through. Connect one end of a coaxial cable to the LNB output
on the STB and connect the other end to the LNB input on your analogue receiver or digital
STB. The connected receiver must be tuned to a different UHF channel than your STB
when using RF-connector. If you want to watch the connected receiver on your TV screen,
turn the STB in stand by mode.
'
Connecting the STB to a TV and a Video Recorder (VCR)
Connecting the STB to a motorized DiSEqC 1.2 system
Loop through
