26
TRIG:
Trigger source of the LFO. If the LFO receives a trigger event it starts from top with the actual running
mode. Available sources are: Note values
[1/4 or ½], bars
[1 or 2],
ENVELOPE 1 & 2
[hit of 100% level], as well as GATE 1 to 4. Gates can trigger with
Step 1
or any 100% step level.
GLIDE:
Glide amount of LFO output. Smoothes edges of stepped waves. [0% - 100%]
RATE:
Frequency of the LFO. Depending on the selected timebase values in hertz or note values are
available. [0.001Hz – 500Hz] or [4/1, 2/1, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32]
DEPTH:
Output depth of the LFO. 100% equals full range of the selected polarity. [0% - 100%]
_______________________________
ARPEGGIATOR/TRANCEGATE
REFLEX-PRO-X provides four identical ARPEGGIATOR/TRANCEGATE modules as modulation source. Each one offers
16 steps and various run and sync modes. A selected step amount [right click into the bar area] enables a step grid for
fixed levels.
LENGTH:
Click on a top row number sets the amount of steps. Inactive steps are greyed out.
LEVEL:
Drawing into the bar area moves the step values between 0% or -100% to 100% depending on the
polarity setting. A right click into that area bings up the division menu [0 – 12 Steps] and the value is
rounded to the next division. This could be useful e.g. for semi tone divisions at pitch modulation.
TRIGGER:
Trigger for advancing to the next step [
depending on the RUN mode
]. Available sources are a selection
of note values, as well as ENVELOPE and GATE triggers (
)
RUN MODE:
Sequence of ARPEGGIATOR/TRANCEGATE steps.
[FORWARD
, BACKWARD
, FORWARD/BACKWARD
, RANDOMN
]
SET:
Drop down menu to select from predefined step value curves.
SYNC:
Enable/Disable host sync. This option is only available if the trigger source is a note value.
GLIDE:
Amount of smoothing between steps. [0%- 100%]
DEPTH:
Overall depth of steps values. [0%- 100%]
Note:
REVERSE / INVERSE
/
COPY
/
PASTE / POLARITY
functionality as described in the
©
2020-2021
doc version 1.2.0
