14
TAPPED MODE
LENGTH:
Click on a top row numbers sets the amount of delay taps. Inactive delay taps are greyed out.
ENABLE:
Click on a tap circle enables/disables the delay tap. White taps are enabled.
DIRECT OUT POSITION:
Direct out feed of the delay line could be the
last tap or the sum of
all taps
output.
FEEDBACK POSITION
: Available taps are 1-16
or auto select of
last tap in selected length. Feedback
position can exceed the actual tap amount and is independent of tap enabled setting and tap
length..
MODE:
Tap delay process modes are:
•
STEREO: Independent left/right delay tap outs.
•
DUAL MONO: Left/right delay taps are summed to a mono out.
•
LEFT MONO: Only left delay taps are routed to a mono out.
•
RIGHT MONO: Only right delay taps are routed to a mono out.
TAP EDIT:
Opens the Tap Edit Page.
Closes the Tap Edit Page
EDIT PAGE:
Toggles TIME/LEVEL/PAN and FX
Tap Edit Page.
(
Only visible if Tap Edit Page is opened)
SWELL
:
Adds additional pre delays to every tap [0% - 100%]. This creates some smoothing effect.
(
Only visible if Tap Edit Page is closed)
SET:
Drop down menu to select from predefined tap settings.
SWING:
Swing amount of consecutive taps. If a binary timebase is used (e.g. 1/8
th
) an amount of 100%
extends all odd taps to a two 1/8
th
triplets and shortens all even taps to one 1/8
th
triplet. [0% – 100%].
TAP TIME:
Manual tap delay time [1ms – 500ms/Tap]. (
Could also be set by Tap-Tempo)
The tap time knob follows the synced timebase values
©
2020-2021
doc version 1.2.0
