14
EN/05.2019 © STULZ GmbH – all rights reserved
CYBERHANDLER 2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Due to the risk of scratching the panels, we advise not to use chains.
Don’t remove the package until the unit is in its final position
All the local standards and regulations about crane transport must be observed
Never stand beneath suspended loads, since there is always a risk that the lifting
gear, shackles, ropes or slings are faulty or damaged
5 3 2 Transport with crane (via shackles)
The CyberHandler2 unit has several hoisting plates on the baseframe where shackles must be
mounted for craning.
Fig. 5-1: Lifting gear
In order to ensure a safe craning of the units, instructions here below must be followed:
• Mount the shackles on the lifting lugs on the base frame.
• Use crossbeams with the appropriate width to prevent the sling to rub against the unit.
• With weatherproof units, make sure the protruding parts of the roof are not damaged by the
lifting gear.
• Do not lift any other loads together with the shipment unit.
• Ensure the suspension angle doesn’t exceed 60°.
Detail of the
attachment system
Crossbeams