34
Copy
：
Touch the Scene name to select it, and then touch the Copy button. A “Please enter a
new name” dialogue pop-up appears. You will see that the digiLiVE has automatically
generated a new name (“Scene Name”_Copy_0). You can accept this name by touching
“OK”, edit the new name and touch ”OK” to confirm, or touch “Cancel” to exit.
New
：
Touch the New button to
take a snapshot of the digiLiVE settings. . A “Please enter a
new name” dialogue pop-up appears. Touch the blank name space to create a name for the
new scene (your device’s on-screen keyboard appears). Once you have named the Scene,
clear the keyboard and touch “OK” to save the scene or “Cancel” to exit. If you do not enter a
name and touch “OK” the creation of a new scene is terminated without saving.
Please note that the maximum name length is 24 characters.
Save
：
Touch the Save button to overwrite the currently-loaded scene with the current
digiLiVE settings.
Load:
Touch
the Scene name to select it, and then touch the Load button to load the Scene
and its settings into the digiLiVE
。
Import
：
Touch the Import button to load a scene from a USB drive connected to the digiLiVE
USB 2.0 connector. A “Scene List” of scenes that have been exported to the currently-
connected USB drive pops up.
Tick the check-box column on the USB Scene List to select all scenes, a single scene or a
selection of scenes. Touch the Import button on the pop-up and the scene(s) will be copied to
the digiLiVE. A “Loading from USB…” popup appears and clears on completion of the import.
If you import a scene with the same name as a scene already saved in the digiLiVE, the
imported scene will be automatically renamed (“Scene Name”_usb_0).
If a USB drive cannot be found, a “No U disk” popup appears.
Export
：
Tick the check-box column on the Scene List to select all scenes, a single scene or
a selection of scenes. Touch the Export button to copy the scenes from the digiLiVE to a
connected USB drive. If the export is successful, a “Success” popup appears.
If a USB drive cannot be found, a “No U disk” popup appears.
Prev / Next
：
Touch either of these buttons to move up or down the Scene list to select a Scene. If, for
example, you create separate scenes for each song in your show, you can use this feature to
quickly move around the list and touch Load to load the scene for the next song.
