24
FX (Effects)
The
digiLiVE 8C
’s
FX (Effects)
are made up of four processing modules – two reverbs
(
REV1
and
REV2
), and two delays (
DEL1
and
DEL2
). The
digiLiVE 4C
has only two
modules –
REV1
and
DEL1
. Using the Input Channel Bus Send Sub-Page, you can route
sends from any input channel to any or all of the four FX. For example you might assign a
vocal channel to both REV1 and DEL1 to create an effect for that vocal with a mix of these
two FX, and then assign an acoustic guitar channel to REV2 and DEL2 to create a different
effect mix for that guitar. Each FX’s sub-page controls its routing to the digiLiVE’s outputs
(Aux1, Aux2 and Main Mix) and the levels being sent to each of those outputs.
FX PAGE
Touching the FX tab on the left hand on-screen menu opens a page that allows you to
access the parameter settings for each FX module. You can exit this page by touching any
other menu tab. This page always opens with the REV1 Sub-Page available for editing.
REVERB SUB-PAGE
Touch the
“
REV1
or
REV2
” button in the FX Sub
-
page to access the Reverb Sub
-
Page.
①
FX Tabs
Touch a tab to open the sub-page for the selected reverb.
②
Reverb Type
Touching the down-arrow opens a sub-menu showing the available reverb types.
Touch a Reverb Type to select it and touch “OK” to load it.
1
2
3
4
5
6
7
