20
③
Sum
Sums left and right input, so both sides of the stereo channel will contain the same (mono)
signal. This can also be used to route the signal to both channels in case there is only one
jack plugged into the stereo input. Touch the button to enable (button turns green, label
changes to “On”), and touch again to disable (button goes dark, label changes to “Off).
Default is disabled.
④
Input Trim
Allows digital amplification or attenuation of the input signal. Touch the button to enable
(button turns green, label changes to “On”), and touch again to disable (button goes dark,
label changes to “Off”). Default is disabled. Adjust the Trim using the soft-encoder on the
touch screen or the main encoder on the front panel (fine tuning can be activated by pressing
and holding down the main encoder). The gain can be adjusted from -20dB to +20dB with
0dB being default.
STEREO INPUT EQ, DYNAMICS and BUS SEND MODULES
All three modules are identical to the equivalent Mic Input modules in features and operation.
