8
About twenty seconds after the switching on, the number of the software version will be shown on the display in “X_00” format.
Afterwards the first of the eight available menus will appear:
Addr
to assign the DMX-512 address
Mode
DMX512 mode, master with pre-set selection, slave
LHrS
lamp working hours
FHrS
fixture total working hours
nChn
channels number
teSt
auto-test
FLIP
display inversion
rSEt
reset of the spot
To select any of the given options, press the MENU button up to when the required one is shown.
Addr
(Address)
To visualise the DMX address press ENTER.
To modify the address press Down and Up buttons and, once the required address has been selected, press and keep ENTER pressed
up to when the display stops flashing (it flashes to indicate that the selected option is different from the pre-set one). To go back to
the options without making any change, press the MENU button.
Mode
(Mode)
To visualise this mode press ENTER.
Use Down and Up buttons to change the mode and, once the required one has been selected, press and keep ENTER pressed up
to when the display stops flashing (it flashes to indicate that the selected option is dif fer ent from the pre-set one). The available
op tions are: no (normal) for the functioning in DMX reception; Pr01…Pr15 (pre-set 01…15) for the master functioning with the re-
spec tive game, SL (slave) for the func tion ing as slave. To go back to the op tions with out any change, press the MENU but ton.
LHrS
(Lamp Hours)
To visualise the number of working hours of lamp press ENTER.
The maximum countable number of hours is 3000. Exceeding this number, the display will show gr3t (greater than 3 thousands).
To reset the counter press simultaneously buttons Down and UP: the display will show CLLH (clear lamp hours). To go back to the
options without making any change, press the MENU button.
FHrS
(Fixture hours)
To visualise the number of working hours of fixture press ENTER.
The maximum countable number of hours is 3000. Exceeding this number, the display will show gr3t (greater than 3 thousands). To
reset the counter press simultaneously buttons Down and UP. A control of the memory will be run and all the default settings will be
stored: the display will then show Init. If the memory is damaged, the display will show the message FAIL. To go back to the options
without making any change, press the MENU button.
Addr
nChn
teSt
FLIP
rSEt
Mode
LHrS
FHrS
SUMMARY OF THE PROGRAMMING FUNCTIONS OF THE CITYCOLOR
