Legal notices
WARRANTY AND LIABILITY
Exclusion of warranty
No warranty claims will be accepted for damages
caused by handling, operation or actions that
are not described in this manual. Damages aris-
en from the following events are not covered by
the warranty:
•
Overvoltage on the device.
•
Liquid in the device or oxidation due to
condensation.
•
Damage resulting from a fall or a mechanical
shock.
•
Modifications carried out without the explicit
authorization of Studer Innotec SA.
•
Nuts or screws partially or insufficiently
tightened during installation or maintenance.
•
Damage due to atmospheric overvoltage
(lightning).
•
Damage due to transport or inappropriate
packaging.
•
Disappearance of original identification
marks.
Disclaimer of liability
Installation, commissioning, use and maintenance
of this device cannot be supervised by Studer
Innotec SA. For this reason, we do not accept
any liability for damages, costs or losses generated
either by an installation that is not conforming
to the prescriptions, by a defective operation or
by poor maintenance. The use of this device is
under the responsibility of the end-user. This
device is neither designed nor guaranteed for
the supply of life support applications or any
other critical application with potential risks for
human beings or for the environment. We shall
assume no liability for patent infringement or
other third party rights involved in the use of
this device.
Compatibility
Studer Innotec SA guarantees the compatibility
of the software updates with the hardware for
one year, starting from the date of purchase. The
updates are no longer guaranteed beyond this
date and a hardware upgrade may be required.
Please contact your reseller for any additional
information on compatibility.
SAFETY PRECAUTIONS
Generalities
Carefully read all safety instructions before pro
-
ceeding with the installation and commissioning
of the device. Failure to follow these instructions
might constitute a lethal physical danger but can
also damage the functionalities of the device.
Therefore this manual should be kept close to
the device.
For any installation, the local and national
norms and regulations in force must be strictly
followed.
Warnings
•
The installation and commissioning of the
communication sets must be entrusted to
skilled and qualified personnel perfectly
aware of the safety precautions and local
rules in force.
•
All components connected to this device
must be conforming to the laws and regu
-
lations in force. Persons without a written
authorization from Studer Innotec SA are
forbidden to do any changes, modifications
or repairs whatsoever. Regarding authorized
modifications and replacements, only gen
-
uine components shall be used.
•
This device is meant for indoor use only
and must under no circumstances be ex-
posed to rain, snow or any other humid or
dusty environment.
•
If used in motor vehicles, this device must
also be protected against vibrations by
shock absorbing components.
EU DECLARATION OF CONFORMITY
The communication set Xcom-LAN described in
this manual meet the requirements specified in
the following EC directives and norms:
Low Voltage Directive (LVD) 2014/35/EU
- EN 62368-1:2014
Electromagnetic Compliance (EMC) Directive
2014/30/EU
- EN 61000-6-2:2005
- EN 61000-6-4:2007/A1:2011
