- 9 -
STYLUS onto the record to start playing.
9.
Adjust the audio output level using the VOLUME CONTROL to obtain a comfortable listening level.
10. Thanks to the auto return feature, the Turntable will automatically stop and return to the
TONEARM HOLDER when the last track of the record has finished playing.
11. To stop the record before it ends, lift the TONEARM using the CUE LEVER and return it carefully
to the home position and use the CUE LEVER to lower the TONEARM onto the TONEARM
HOLDER.
12. Replace the original protective plastic cover onto the STYLUS when not in use.
Important Notes:
Do not turn the PLATTER manually or in a counterclockwise direction to avoid damage.
Moving or jarring the Turntable without securing the Locking Clip of the TONEARM HOLDER
could result in damage to the TONEARM.
PITCH CONTROL
The PITCH CONTROL allows you to vary the pitch of the phono audio output by means of changing
the motor speed of the record once the correct speed (33/45 RPM) is chosen. The center click denotes
the point of neutral pitch. Rotate to the right side of the center click to increase the pitch and to the left
side of the center click to decrease the pitch.
ENCODING RECORD TRACKS INTO MP3 FILES
You can convert your favorite vinyl record sound tracks into MP3 files which are saved on a USB Flash
Drive via the USB PORT located on the front panel.
1.
Press the FUNCTION BUTTON to select “PHONO" function and the PHONO INDICATOR will
light steadily.
2.
Set th
e PHONO MODE SELECTOR at the rear panel of the Turntable to “PHONO OUT” position.
3.
Set up the vinyl record track that you want to record using the CUE LEVER to position it at the
starting point and suspend playing.
4.
Set the PHONO MODE SELECTOR to “PHONO REC” position.
5.
Press RECORD BUTTON to set up the MP3 encoding process in 1 to 2 seconds. When the
RECORD INDICATOR lights, the system is ready to start MP3 encoding.
6.
Start playing the selected song you want to record by lowering the CUE LEVER.
7.
When the end of the current song is reached, press the RECORD BUTTON to stop encoding and
the RECORD INDICATOR will turn OFF. The corresponding MP3 file will be saved in a new folder
named “audio” in the USB flash drive.
8.
To encode more sound tracks, please repeat steps #2 thru #7 above, otherwise all songs on the
vinyl record will be encoded into one single MP3 file. Advanced auto track separation feature is
not supported.
Note:
The flash drive (not included) must be formatted in FAT32 file system and the maximum supported
capacity is 64GB. High speed flash drives are recommended for smooth encoding.
PLAYING SONGS ON A USB FLASH DRIVE
1. Insert your USB Flash Drive with MP3 songs into the USB PORT located on the front panel.
2. Press FUNCTION BUTTON
to select “USB” function. The USB INDICATOR will light and then it
will start playing automatically in about 1 to 5 seconds.
3. Press PLAY/PAUSE
BUTTON to control play/pause.
4. Press SKIP FORWARD
BUTTON to skip to next song and SKIP BACKWARD
BUTTON
to skip to previous song.
5. Press REPEAT BUTTON once to repeat the current song (Repeat 1). The REPEAT INDICATOR
will flash once per second (fast flashing).
6. Press REPEAT BUTTON again to repeat all tracks (Repeat All). The REPEAT INDICATOR will
now flash slower, once per 2 seconds (slow flashing).
7. Press REPEAT BUTTON again to cancel repeat mode. The REPEAT INDICATOR will now turn
Содержание SB6077
Страница 1: ......
