- 11
-
3.
Press RECORD BUTTON to set up the MP3 encoding process. When the RECORD INDICATOR
lights, the system is ready to start MP3 encoding.
4.
Play the selected song at maximum undistorted volume in order to keep the encoded song loud
and clear.
5.
When the end of the current song is reached, press the RECORD BUTTON to stop encoding and
the RECORD INDICATOR will turn OFF. The corresponding MP3 file will be saved in a new folder
named “audio” in the USB flash drive.
6.
To encode more sound tracks, please repeat steps #2 thru #5 above, otherwise all songs on the
Bluetooth device playlist that have been played will be encoded into one single MP3 file. Advanced
auto track separation feature is not supported.
Note:
The flash drive (not included) must be formatted in FAT32 file system and the maximum supported
capacity is 64GB. High speed flash drives are recommended for smooth encoding.
CARTRIDGE AND STYLUS REPLACEMENT
(FOR EXPERIENCED USERS ONLY!)
As the stylus gradually wears after playing a considerable period of time, the sound quality will
deteriorate and it is time to replace the STYLUS. In addition, if the CARTRIDGE is damaged by
accident, it can also be readily replaced by following the instructions below:
CARTRIDGE REPLACEMENT
Before proceeding, please replace the original protective plastic cover onto the STYLUS.
STYLUS REPLACEMENT
To remove the old stylus (needle), hold the cartridge in one hand, grasp the
plastic stylus housing with thumb and forefinger, and pull away from the
cartridge. The stylus assembly comes away at a slight angle, as indicated by
the arrow in the diagram. To install the replacement stylus, insert the new
stylus assembly into the cartridge at a slight angle, so the hook at the end of
the stylus fits into the slot in the cartridge body. The stylus assembly should
click into place when fully seated in the cartridge. The stylus must be fully
seated in the body for proper operation. Spare stylus, type ATN3600 (not
included), can be purchased separately at leading HiFi equipment stores and
online.
Notes:
Put the original protective plastic cover back onto the STYLUS to avoid accidental damage to the
STYLUS TIP while replacing the CARTRIDGE.
Replace only with the specified type of stylus.
Spare stylus or cartridge is not included with your product.
Содержание SB6077
Страница 1: ......