- 7 -
PART NAME
DESCRIPTIONS
33
VOLUME
CONTROL
(HIDE & EJECT
STYLE)
The VOLUME CONTROL is normally flush with the top panel of the RIGHT
SPEAKER. Press it once to eject and expose the VOLUME CONTROL knob. Rotate
the VOLUME CONTROL clockwise to increase the audio output level and
counterclockwise to decrease the audio output level. Press it again to hide.
34
PHONO IN
JACKS
This pair of RCA INPUT JACKS accepts
ONLY
the PHONO OUT CABLE RCA plugs
from the Turntable unit. The blue color-coded RCA Jack denotes the R channel while
the yellow denotes the L channel.
35
LINE IN JACKS
This pair of RCA INPUT JACKS accepts
ONLY
the LINE OUT CABLE RCA plugs
from the Turntable unit. The red color-coded RCA Jack denotes the R channel while
the white denotes the L channel.
36
LEFT SPEAKER
OUTPUT JACK
This single RCA OUTPUT JACK accepts
ONLY
the red RCA plug from the LEFT
SPEAKER
37
DC JACK
Connect the 5.5mm DC plug of the bigger AC ADAPTER (DC15V
3A
)
securely into this JACK.
38
POWER
INDICATOR
The LED will light in red when the ACTIVE SPEAKER SYSTEM power is turned ON.
39
POWER ON/OFF
BUTTON
Press it once to turn ON the ACTIVE SPEAKER SYSTEM. Press it again to turn OFF.
IMPORTANT NOTES
Avoid installing the unit in locations described below:
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
Places exposed to high levels of electromagnetic interference such as microwave ovens,
fluorescent lamps or WiFi routers.
Dusty, humid or moist places.
Places subject to constant vibrations.
POWER SOURCE
This Unit is designed to only operate on AC adapters (included) that run on normal 120V~ 60Hz
household power. Do not attempt to operate the unit using any other power source. You could cause
damage to the unit and void your warranty.
GETTING STARTED
SETTING UP THE PHONO TURNTABLE
1.
Install the DETACHABLE DUST COVER by aligning the hinges to the dedicated sockets on the
Turntable unit and snap in fully.
2.
Remove the cable tie securing the TONEARM.
3.
Adjust the COUNTERWEIGHT at the far end of the TONEARM to the required tracking force of
2.5 grams if necessary.
4.
Remove the original protective plastic cover from the STYLUS and keep it for replacement after
playing records or before changing the CARTRIDGE in future.
CABLE CONNECTION
1.
Plug the smaller AC Adapter (DC9V
1.5A) into the DC Jack of the Turntable unit.
2.
Plug the bigger AC Adapter (DC15V
3A) into the DC Jack of the Right Speaker unit.
3.
Connect
RCA “PHONO OUT” cable, RCA “LINE OUT” cable and RCA “Left Speaker” cable between
the Turntable and Right Speaker as shown below:
Содержание SB6077
Страница 1: ......