Stuart Turner Supersub 460A Скачать руководство пользователя страница 3

- 3 -

General

The submersible pump range is designed for re-circulation, drainage and transfer of

fresh water in outdoor or indoor applications.

Model types within the range which have the suffix ‘A’ incorporate an adjustable float

switch assembly which provides automatic pump control.

An optional foam pre-filter is available for the Supersub model - contact Stuart Turner

Ltd for further details.

Supersub Range

This model is suitable for clean water, rain water or waste water applications.
Note: Waste water is water that has been used in the home except water from toilets 

eg. dish, shower and laundry water.

Supervort Range

These models are suitable for dirty water applications and are capable of handling

semi-solids in suspension of up to 20 mm in diameter.  They are also suitable for all
applications specified in the Supersub range.

Diver range

This model range has high head (pressure) capabilities and is suitable for clean water

applications only.

PRODUCT DESCRIPTION

Electric motor driven submersible pump with float switch control on selected models.

Motor

All motors are induction type, permanent capacitor, fitted with integral auto-resetting

thermal overload protection, IP68 enclosure, class ‘B’ insulation and continuously rated.

The motor is encapsulated in a casing and protected from water ingress by three

separate lip seals running on a shaft sleeve, lubricated with a biodegradable vegetable oil.

Pump

All models are close coupled to the motor and are of centrifugal design and are

supplied as standard with a stepped hose connector.

Both Supersub and Supervort are single stage units and are supplied pre-fitted with a

10 metre mains supply cord.

Diver 3 and 4 are three and four stage units respectively and are supplied as standard

with a non-return valve and are pre-fitted with a 15 metre mains supply cord.

Standard pump materials of construction of major wetted parts are as follows.

Model

Body

Impeller

Shaft

Motor
Encapsulent

Shaft
Sleeve

Seal
(Lip)

Supersub

Polypropylene

Noryl

Stainless Steel

Stainless Steel

Ceramic

Nitrile

Supervort

Polypropylene

Noryl

Stainless Steel

Stainless Steel

Ceramic

Nitrile

Diver

Polypropylene

Noryl

Stainless Steel

Stainless Steel

Ceramic

Nitrile

Cont....

Содержание Supersub 460A

















Отзывы: