- 15 -
Cont ...
6 MAINTENANCE
6.11
Water quality:
The iBoost has been manufactured to the highest standard from
WRAS approved materials.
As with any stored volume of water; in order to ensure that the water remains
fit for use the water temperature needs to remain below 20
o
C. The quality of
stored water will deteriorate with time and temperature. Bacterial growth is
dependent on the water temperature, growth rates will be higher when the
conditions are warm.
If the water remains unused for long periods of time, the tank should be drained
and flushed through. The tank should be cleaned on an annual basis to protect
against bacterial growth. If the iBoost is installed in a rental property, it must be
maintained in line with current Health & Safety regulations.
6.12 The tank can be drained by isolating the mains water supply to the fill valve and
using the pump to pump the water out of the tank.
6.13
Front cover cleaning:
The front cover is made from acrylic capped ABS, it
must only be cleaned with warm soapy water or mild detergent.
Do not
use abrasive cleaners. The front cover is supplied with clear protective
film in place, this can be removed by lifting at the edge.
Fig. 20
Drain valve
Do not
overtighten