19
9.4
Configuration
Using
we can change the values and press
ENTER
for validation. To quit the
configuration sequence at any time press
MENU
. After every
ENTER
the different
screens that constitute the configuration sequence will appear.
P LINE INPUT P
To start configuration sequence press
MENU
during 3”.
SET UP MENU
Configuration menu, access to installation phase
LANGUAGE
ENGLISH
By mean of keys
select the desired language:
“LANGUAGE ENGLISH”
“LANGUE FRANÇAISE”
“LINGUA ITALIANA”
“IDIOMA ESPAÑOL”
MAX. INT. PUMP
OFF
By mean of keys
input the nominal intensity value in A of pump 1 enabling the
thermal protection. This value is located over the characteristics plate of the
motor. Press
ENTER
for validation.
ROTATION SENSE
0 Hz
Using the START/STOP pushbutton verify the rotation sense. By mean of keys
pq(0/1) we can change it. Press
ENTER
for validation.
MIN. SPEED
15 Hz
Using
we can increase the lower limit of the speed of rotation of the pump’s
motor.
LEVEL PROBE
NO
If the installation does not have level probe press
ENTER
to validate
NO
.
If the installation has a level probe, use keys
to change to
YES
.
