position and / or print delay to the desired marking position.
The machine is
ready for work.
Work
.
The operator works with the label applicator. The marking machine works
automatically and synchronously with the labeling machine. Normal operation is indicated by
blinking green light.
It is necessary to periodically discard the roller with waste tape, as the motor is turned
off and on by the switch on the panel.
When the entire volume is full with waste tape the winding mechanism can become
blocked and overloaded.
The machine stops automatically. This is indicated by 1 blink
followed by a pause - with a red light.
When the waste tape breaks or runs out of it the winding motor starts to spin
continuously. The machine stops automatically. This is indicated by 3 blinks followed by a
pause - with a red light.
To exit emergency mode, it is necessary to turn off the power.
Several test starts of the machines are performed. If necessary, adjust the printer
-
10
-
phone: (+359) 66 801 536 fax: (+359) 801 547
www.
eu
stselectronics.
STS8
15
V.
1.00
