- 5 -
phone: (+359) 66 801 536 fax: (+359) 801 547
www.
eu
stselectronics.
Equipment /Figure 1.1, Figure 1.2/.
1.
Limiter
-
roll label
.
12.
Guiding Parts
- static.
2.
Roll label holder
.
13. Tensioner.
3.
Guiding Parts
- rotating.
14. Mounting plate to STS810.
4. Movable platform.
15. Mounting plate to
STS8
08.
5. Fixing screw of platform.
16.
6. Swing printer.
17. Phoebe
base film(tape)
.
7. Fixing screw swing
18. Connector
s
external start.
8. Printer.
19.
Power supply switch
9. Front panel.
20. Stickers connectors.
10. Indication - status
21. Sticker ‘Label path for STS808‘
11. ON / OFF motor switch.
22. Sticker ‘Label path for STS810‘
Scope of the delivery.
Check immediately after unpacking the machine:
- 1 machine STS815 with marking printer;
- 1
ink
cartridge for marking printer;
- 1 power cable 220V, 3x0.75mm2, 1.8m;
- 1 signal cable 4x0.25mm2, 1m, with M12-4P connectors;
- 1 mounting plate for STS808 with fasteners;
- 1 mounting plate for STS810 with fasteners;
- 1 operation manual.
Technical data.
Supply voltage:
220V
AC
, 50Hz.
Own consumption:
<100VA.
Electrical conection:
cable with plug type 'SHUKO'.
Dimensions
:
280
mmW,
550
mmH,
52
0mmD.
Machine weight
:
21
kg
.
Diameter of the labels roll:
< 200mm.
Spool diameter
:
7
6mm.
Width of the roll / of the label /:
2
5
... 150
mm.
Printer positioning:
- left / right / relative to the center /:
+/- 60
mm;
- forward / backward / relative to the center /:
+/- 80
mm;
Indiction - Two color LED:
- blinking green - normal operation;
- blinking red - 1 blink, pause - overloaded motor;
- blinking red - 2 blink, pause - overloaded output signal to the printer;
- blinking red - 3 blink, pause - long rotation of the motor - torn or finished waste label
base.
Noise information.
Noise level determined by analysis A.
Acoustic pressure level <70dB (A).
Noise level <70dB.
The roll
for pulling the base film
.
STS8
15
V.
1.00
