Stryker Prime TC, Руководство по обслуживанию

Страница: 18 / 64

A
B
C
Torque item A
to 33 ± 7 ft-lb
F Fiig gu urre e 7 7 –– F Flliip p--u up p a arrm mrre esstt rre ep plla acce em me en ntt
5. Pulling upward on the armrest release pin, install the supplied flip-up armrest onto the chair frame.
6. Using a 5/16” hex wrench, install the supplied hard stop pin (removed in step 2). Using a 3/8” drive torque wrench,
torque the hard stop pin to 33 ± 7 ft-lb.
7. Verify proper operation before you return the product to service.
F Frro on ntt cca asstte err w wh he ee ell rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Pick
• (2) 5/32” hex wrench
• 3/8” drive torque wrench (in-lb)
P Prro occe ed du urre e::
1. Position the chair on its back.
2. Using a pick, remove and save the caster wheel axle barrel nut covers (C) (Figure 8).
3. Using two 5/32” hex wrenches, remove the axle barrel nut (B) and axle screw (D). Save the axle barrel nut and axle
screw. When reinstalling the axle screw, use a 3/8” drive torque wrench to torque the axle screw (D) to 70 ± 10 in-lb.
4. Grasp the caster wheel (A) and pull outward to remove the wheel from the fork (E). Discard the wheel.
EN 14 1460-009-002 Rev B.0