Stryker Prime TC, Руководство по обслуживанию

Страница: 17 / 64

A
B
Torque item A
to 70 ± 10 in-lb
F Fiig gu urre e 6 6 –– S Se ea att rre ep plla acce em me en ntt
N No otte e -- Start all four button head cap screws by hand before tightening them completely.
3. Verify proper operation before you return the product to service.
F Flliip p--u up p a arrm mrre esstt rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• 5/16” hex wrench
• Syntec grease (3000-200-719)
• 3/8” drive torque wrench (ft-lb)
P Prro occe ed du urre e::
1. Put the flip-up armrest in the forward and locked position.
2. Using a 5/16” hex wrench, remove the hard stop pin (A) from the bottom of the flip-up armrest (Figure 7). Discard the
pin.
3. Using one hand, pull up on the armrest release pin (B) and use your other hand to pull outward on the flip-up armrest (C)
to remove the armrest.
N No otte e -- There is grease in the pivot area of the arm.
4. Grease the supplied armrest pivot with Syntec grease (3000-200-719).
1460-009-002 Rev B.0 13 EN