manualshive.com logo in svg

Stryker L10, Инструкции для пользователей из Соединенных Штатов

Поделиться
Скачать
Stryker L10 Скачать руководство пользователя страница 37

33

Replacing the Fuses

To avoid the risk of fire, use only fuses of the value specified on 

the fuse label located on the rear panel of the console.

1.  Unplug the power cord from the wall outlet and remove the cord from 

the light source console.

2.  Unlatch the fuse holder above the AC inlet and remove it. (You may need 

to press the tab on the fuse holder with a slender screwdriver to release 

the latch.)

3.  Replace the fuse with the same value and rating.
4.  Reinstall the fuse holder until the tab snaps in place.

Storage

Never store the light source in a non-ventilated, humid environment. This can 

damage the delicate electronics in the device.

Expected Service Life

The L10 AIM Light Source has an expected service life of 2000 hours (2 years 

based on 1000 cases per year).

Disposal

This product contains electrical waste or electronic equipment. 

It must not be disposed of as unsorted municipal waste and 

must be collected separately in accordance with applicable 

national or institutional related policies relating to obsolete 

electronic equipment.

Dispose of the light source according to local laws and hospital practices. 

Refer to the diagram below to identify components that must be recycled. 

(The console is shown with the chassis cover removed for clarity.)

Содержание L10





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды