Stryker CUB FL19H, Руководство по обслуживанию

Страница: 39 / 152

C CA AU UT TIIO ON N -- Always make sure that the sawhorses can support at least 200 lb (91 kg).
4. Using a #2 Phillips screwdriver, remove the 18 screws (A) that secure the lower head (B) and foot (C) cover plates
(Figure 25). Remove and save the cover plates. Save the screws.
5. Lift the black bellows (C).
6. Using bungee cords, support the lifted black bellows.
7. Using two 1/2” combination wrenches, remove the four bolts (A) and four locknuts (B) that secure the litter support tubes
to the two base posts (Figure 24). If the bolts are stuck, raise the end of the litter slightly to ease removal. Save the bolts
and locknuts.
A
B
C
C
F Fiig gu urre e 2 24 4 –– L Liitttte err rre em mo ovva all -- ffiixxe ed d b ba asse e
8. With the assistance of another person, lift off the litter and set the litter aside on a second set of sawhorses.
9. Reverse steps to reinstall.
10. Verify proper operation before you return the product to service.
L Liitttte err rre em mo ovva all,, h hyyd drra au ulliicc b ba asse e
T To oo ollss rre eq qu uiirre ed d::
• #2 Phillips screwdriver
• Rubber hammer
• (2) 1/2” combination wrench
• (2) Bungee cords (or equivalent)
• (4) Sawhorses (or equivalent)
P Prro occe ed du urre e::
1. Raise the rails to the highest position.
2. Apply the brakes.
1900-009-002 Rev AA.6 37 EN