Stryker 297300000000, Руководство по обслуживанию

Страница: 43 / 76

L Lo ow w A Aiirr L Lo ossss ((L LA AL L)) ffa an n rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Zipper pull tool or equivalent
P Prro occe ed du urre e::
1. Apply the brakes on the P Prro oC Cu uiittyy bed frame.
2. Unplug the support surface power/data cable from the bed.
3. Remove the headboard and footboards and set aside.
4. Lower all the siderails.
5. Unsnap the two secure snaps (C) at the foot end corners (Figure 18).
6. Unsnap the two foot end corner retainers (B) (Figure 18).
7. Insert a zipper pull tool or equivalent through the hole in the zipper slider to unlock.
8. Using the zipper pull tool or equivalent, unzip the support surface top cover from the bottom cover (A) (Figure 18) and
stop unzipping at the middle of the opposite side (D).
N No otte e -- The zipper starts on the patient right side near the foot end.
A
B
C
D
F Fiig gu urre e 1 18 8 –– T To op p cco ovve err
9. Fold the cover up toward the head end.
10. Separate the six V Ve ellccrro o® connectors that hold the foot section gel crib to the pod assembly.
11. Lift upward and remove the foot section gel crib (F) (Figure 19). Save the gel crib.
2973-009-002 Rev AB.0 39 EN