Struers Exotom 100, Инструкция по эксплуатации

Страница: 31 / 247

Exotom-100
Instruction Manual
25
The horizontal position (cutting offset) of the cut-off wheel can be
set manually, prior to the cutting. In the ExciCut and Direct Cut
cutting modes, the cut-off wheel may be moved 10 mm towards
the front and 60 mm towards the back of the cutting chamber
(‘+10/-60’, default value is 0). This allows for greater flexibility in
terms of cutting difficult work pieces and clamping.
To change the position, select the parameter by pushing the knob.
Turn knob to change the value.
Push knob to confirm the desired value.
Once the new value has been confirmed, the cut-off wheel moves
to the desired position - even if the protection hood is open.
If the cutting offset has been changed (i.e. not the default value of
0), the Cutting Display heading will remind the operator which
offset has been selected.
Cutting Offset
Note :
Cutting Offset requires installation of the AxioCut option.