Structural Concepts grocerant FB9S-6HO.7355, Инструкция по установке и эксплуатации

Страница: 6 / 39

6
CASE REMOVAL FROM SKID / REMOVABLE TOE-KICKS
1. Remove Case From Skid
Fork Lift
• To lift case up for lift-truck forks to slide into
position, use J-Bar Lift Tab (location shown).
•
Make certain case is well-supported on lift truck.
Move into position.
J-Bar or Dolly Only (No Fork Lift)
• See illustration below for J-bar/dolly case
removal instructions.
•
Slide case to edge of skid.
• With several people in position, carefully slide
frame support rail to edge of skid.
•
With several people in position, slide case
several more inches (off skid) and lower rear
frame support to floor.
•
Once the rear frame support rail rests on the floor,
have several people supporting front of case while
skid is slid out from under case.
•
After case is off skid, several employees may be
required to slide into position.
2. Removable Toe-Kicks
•
Toe-kicks are lifted up and off case.
•
Slots in toe-kicks reside over hooks.
•
Case magnets also hold toe-kick in position.
•
Illustrations below show case after toe-kick
has been removed and reversed (for
illustrative purposes).
J-Bar Lift Tab &
J-Bar Lift
Hook (Typ.)
Magnet (Typ.)
Rear Toe-Kick
(Typ.)
Front Toe-Kicks
Shown Above
Note: Model FB9S-6HO.7355 (shown)
may not exactly reflect every feature or
option of your particular case.