Stropuva Pellet boiler Series, Технический паспорт, руководство по установке и эксплуатации

Страница: 6 / 22

Simple domestic tools like scoop, broom and shovel can be used for maintenance of boiler. To clean the boiler you will
need brush, poker and scraper, ash pump.
2. DESCRIPTION OF PRODUCT
2.1 General information
Pay attention to the instructions for connecting the boiler to heating system. Installation of boiler must be carried out in
accordance with rules and standards that apply for heating systems in that country, especially:
•
EN305 “Heating boilers”, 5
th
part. Solid fuel heating boilers, with automatic or manual ignition, 300 kW rated
power.
In systems where temperature can exceed 90 o C and water column is larger than 15 m, spiral cooler with permeability of
1500 l/h needs to be installed. Pressure of cold water supplied to safety device cannot be lower than 2 bar. Water flow
from cooler’s low temperature outlet must be designed in a way that it could not be stopped.
Boiler can be controlled when thermostat and emergency thermostat works properly and draft in chimney does not
exceed 20 Pa. If this value is exceeded, chimney’s draft flow must be reduced. Manufacturer tested this boiler with 4 bar
pressure.
Boiler can be installed by installer who works with accordance to current requirements and laws and understands the
appropriate operation of heating system. Quality of boiler installation must be confirmed by certificate of installation
works, issued by installer.