Page 12 of 15
Recharging the Battery
⚠
WARNING
Always ensure that internal battery is fully charged. Do not overcharge the battery.
Leaving a battery in a discharged state or without recharging every 90 days may result in
permanent damage to the battery and poor boosting performance.
Do not use the AC or DC outlets while the power pack is being charged. Doing so may damage
the charging adapter.
Do not attempt to recharge the internal battery if it is frozen.
Use the supplied AC charger to recharge the unit.
Recharge the unit every 90 days to maintain maximum battery capacity and extend unit life.
Recharging the Jumpstarter
1. Turn off all accessories before recharging.
2. Plug one end of included AC charger into charging input port of the jumpstarter and other end to
115 V AC electrical socket.
3. The charging status will be displayed on LCD screen.
Do not unplug the power cord until the battery is fully charged. It may take 30 hours or more to fully
recharge the jumpstarter battery provided the voltage is 115 V AC.
Maintenance
Maintain the jumpstarter by adopting a program of conscientious repair and maintenance in
accordance with the following recommended procedures. It is recommended that the general
condition of any jumpstarter be examined before it is used. Keep your jumpstarter in good repair.
Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal
operation schedule.
Maintenance Interval
Maintenance Point
Before operating or after using
Clean the exterior surface of the jumpstarter with a damp cloth
to prevent accumulation of dust and dirt.
After using
Make sure USB/LED/DC is OFF.
Make sure ON/OFF Power Switch to OFF position after use.
Make sure disconnecting the 12V DC appliances after use to
avoid over discharge of jumpstarter
’s internal battery.
Make sure the plastic covers on the 12V DC outlet are closed
after use.
Extending battery lifespan
Recharge the battery at least once every 90 days. This will
extend the durability and efficiency of the battery.
