background image

Page 6 of 15 

 

 

Stay alert, watch what you are doing, and use common sense when operating the jumpstarter. Do 
not use the jumpstarter while you are tired or under the influence of drugs, alcohol, or medication. 
A moment of inattention while operating the jumpstarter may result in serious personal injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 
parts. Air vents on the jumpstarter often cover moving parts and should be avoided. 

 

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant 
safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust 
mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection 
systems, and hearing protection when appropriate. This applies to all persons in the work area.  

 

Do not overreach. Keep proper footing and balance at all times. 

 

Ensure the power switch is off prior to plugging in the unit. 

 

WARNING

 

ELECTRICAL SAFETY 

 

Grounded tools must be plugged into an outlet properly installed and grounded in accordance 
with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. 
Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether 
the outlet is properly grounded. If the tools should electrically malfunction or break down, 
grounding provides a low resistance path to carry electricity away from the user. 

 

Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This 
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the 
plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change 
the plug in any way. Double insulation eliminates the need for the three wire grounded power cord 
and grounded power supply system. 

 

Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. 
There is an increased risk of electric shock if your body is grounded. 

 

Do not expose the unit to rain or wet conditions. Water entering will increase the risk of electric 
shock. 

 

Do not abuse the power cord. Never use the power cord to carry the jumpstarter or pull the plug 
from an outlet. Keep the power cord away from heat, oil, sharp edges, or moving parts. Replace 
damaged power cords immediately. Damaged power cords increase the risk of electric shock. 

CAUTION

 

JUMPSTARTER

 

USE AND CARE 

 

Do not force the jumpstarter. Products do a better job and are safer when used in the manner for 
which they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the jumpstarter will operate 
properly and perform its intended function. Replace damaged or worn parts immediately. Never 
operate the jumpstarter with a damaged part. 

 

Do not use a jumpstarter with a malfunctioning switch. Any unit that cannot be controlled with the 
power switch is dangerous and must be repaired by an authorized service representative before 
using. 

 

Disconnect the power/air supply from the product and place the switch in the off position before 
making any adjustments, changing accessories, or storing the jumpstarter. 

 

Store the jumpstarter when it is not in use. Store it in a dry, secure place out of the reach of 

Содержание 500A 53013
















Отзывы: