Strongway 49167, Руководство пользователя

Страница: 11 / 19

Page 11 of 19
Step 8: Attach Tongue to Top Tray
Step 8 Hardware Needed:
4
–Hex Bolt 5/16” x 1-1/4” (C)
2
– Hex Bolt 5/16” x 3/4” (D)
6
– Lock Nut 5/16” (K)
8
– Spacer 1/4” (Q)
Attach the Tongue (5) to the Top Tray (1) with
the large opening of the tray slot facing forward.
Attach the Tongue (5) using the top tray holes to
the
right side of the long slot (viewing from front).
For the right side holes of the tongue connection
(viewing from front), use Bolt
5/16” x 1-1/4” (C),
2 Spacers
1/4” (Q) per Bolt, and Lock Nut 5/16”
(K)
for each hole. For left side holes of tongue
connection,
use Bol
t 5/16” x 3/4” (D) and Lock Nut 5/16” (K),
no spacers, for each hole.
For holes on the left side of long tray slot (viewing
from front),use Hex Bolt
5/16” x 1-1-4” (C), two
Spacers 1/
4” (Q) per bolt, and Lock Nut 5/16” (K).
Note: These do not attach to anything. This protects
the lift handle from weight added to top tray.
Fully tighten all connections.
See Figure 8.
Step 9: Attaching Middle Brace
Step 9 Hardware Needed:
4
– Hex Bolt 5/16” x 1” (E)
4
– Lock Nuts 5/16” (K)
4
– Flat Washers 5/16” (M)
Put the Middle Brace (2) into position and
fasten to the Top Tray using Bolts
5/16” x 1”
(E), Flat Washers 5/16” (M), and Lock Nuts
5/16” (K).
Do not fully tighten until final step.
See Figure 9.
5/16” x 1-
1/4”Hex Bolt,
2
– 1/4”
Spacers and
5/16” Lock Nut
5/16” x 3/4"
Hex Bolt,
2
– 1/4”
Spacers and
5/16” Lock Nut
5/16” x 3/4”
Hex Bolt
5/16” x 3/4”
Hex Bolt
5/16” x 1-1/4”
Hex Bolt,
2 - 1/4"
Spacers
and 5/16”
Lock Nut
Figure 8
Figure 9