18
English
Second Subtitle Language
:
Use
t
u
to select the second preferred subtitle language, to be shown if the
First Subtitle
Language
isn’t available.
8.3.2 System Settings
This item allows you to set the output parameters of the receiver according to a connected TV set and to a
digital audio amplifier (if applicable). Other system setting can be set as well.
Resolution
:
Select the screen resolution according to the characteristics and supported modes of
your TV set. Available options:
Auto
,
576i
,
576p
,
720p
,
1080i
,
1080p
, 4K (3840x2160) and 4K
(4096x2160).
576i
and
576p
are for 4:3 TV sets in SD quality.
Scart mode
Select the Scart output type your TV set can handle. Available options:
CVBS
or
RGB
.
Aspect Ratio
Select an aspect ratio depending on your TV set screen format. Available options:
4:3
or
16:9
.
Aspect Conversion
: Change the aspect conversion. Available options:
Pan&Scan
,
LetterBox
,
Combined
and
Ignore
.
HDMI Output
:
Adjust this setting in accordance to the connected audio equipment. Set the
PCM
option
to convert complex digital audio formats supported by the receiver, such as Dolby Digital
Audio, to STEREO audio and pass it to the HDMI output.
Set the
BitStream
option to bypass original audio bitstream through HDMI to a connected
audio equipment which can decode complex digital audio formats, such as Dolby Digital
Audio.
SPDIF Output
:
Adjust this setting in accordance to the connected audio equipment.
Set the
PCM
option to convert complex digital audio formats supported by the receiver,
such as Dolby Digital Audio, to STEREO audio and pass it to the S/PDIF output. Set the
BitStream
option to bypass original audio bitstream through S/PDIF to a connected audio
equipment that can decode complex digital audio formats, such as Dolby Digital Audio.
Note:
On the S/PDIF output it is not possible to sent Dolby Digital Plus format, it will be
down converted to Dolby Digital.
OSD Transparency
:
Define the transparency of menus and other system information windows. Available
options:
10
,
20
,
30
,
40
,
50
.
Banner Timeout
: Define the duration of the info banner display in the viewing mode. Available options:
3
Seconds
,
5 Seconds
,
7 Seconds
and
10 Seconds
.
Auto Standby
:
Define the period of time of the receiver automatically switching to Standby mode if no
commands have been received from the remote control. Available options:
Off
,
1 Hour
,
2
Hours
,
3 Hours
,
4 Hours
,
5 Hours
,
6 Hours
. The default setting is
3 Hours
.
HDMI-CEC
:
Options are
On
,
Off
. Consumer Electronics Control (CEC) is a feature of HDMI designed
to allow users to command and control devices connected through HDMI by using only
one remote control.
Note:
Not all manufacturers have the same implementation of the
CEC standard, it may not always work (fully) with any odd brand of TV . If CEC is causing
problems, switch it
Off
.
Audio Description Switch
:
AD. Options are
On
,
Off
. Set this option to
On
if you like to have support of an audio track
that describes the content on screen. Useful for the visual impaired. If available from the
broadcaster.
Audio Description Volume
:
Select the volume of the accompanying AD audio track. It will mix with the original Audio.
Range:
0 to 32
.
HbbTV
Hybrid Broadcast Broadband TV. Options are
On, Off
. View content, not delivered via
Satellite, but by IP (Internet) connection.
